Advantages of burgmann mg12 Mechanical Seal

MG12 Mechanical Seal

MG12 Mechanical Seal

The Bergmann mg12 mechanical seal is one of our famous elastomers bellows seals, widely used in various kinds of industries, such as the process industry, chemical industry, pulp and paper industry, water and wastewater technology, food and beverage industry, sugar industry, etc. Typical applications are oil, water, sewage, and other moderately corrosive mediums.

Advantages of burgmann mg12 Mechanical Seal:

The sealing system of Bergmann mg12 mechanical seal prevents leakage of oil or other lubricants and prevents contamination of the operating area. It also reduces friction loss, which improves pump operation and reduces power consumption. It is easy to install and maintain.

Compared to a traditional packing and sleeve system, the Bergmann mg12 mechanical seal has much higher functional security and does not require special tools to install or dismantle. It also eliminates measuring errors and has high reliability.

Our burgmann mg12 mechanical seal consists of a rotary ring and a rubber bellow, which can support the pressure and eliminate indentation and corrugation. The rubber below prevents radial run-out so that the floatability of the rotary ring is increased.

Different materials can be selected according to the application and host machine equipment. Boron carbide, silicon carbide, and graphite are the most common materials in this type of seal.

This mechanical seal can be installed in a wide range of applications, such as centrifugal pumps, slurry pumps, and other rotary shaft equipment. It can also be used in the wastewater and water systems industries for applications such as waste treatment, potable water, and HVAC.

It can be adjusted automatically to compensate for abnormal shaft-end play, run-out and primary ring wear. It has a non-clogging, single-coil spring that provides greater dependability than multiple spring designs and will not foul due to fluid contact.

In addition, it can be designed to fit the bore of the shaft and has a non-slip drive band that protects the elastomer bellows. This seal is especially suitable for high-temperature applications.

This seal is widely used in centrifugal and slurry pumps, rotary screw pumps, and compressors. It can also be used in the wastewater & water systems industries for applications such as waste treatment, pumping water, and potable water. It is ideal for applications that require low energy consumption and maximum efficiency.

TYS1009、MG1、MG12、MG13 Rubber bellows mechanical seal professional mechanical seal supplier